?2008 littelfuse, inc. revised: october 24, 2008 polyfuse ? resettable ptcs ?2008 littelfuse, inc. 600r series radial leaded > 600r series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/600r.html for current information. 600r series t 5 i f 3 4 f s j f t j t e f t j h o f e u p q s p u f d u b h b j o t u q p x f s fault events typically found in telecom applications. this series is designed to be used in applications that need to meet the requirements of grC1089-core and ul60950/ en60950/iec60950. these resettable devices also help to meet the requirements of itu k .20, k .21 and k .44. electrical characteristics part number i hold (a) i trip (a) v max v int / v op i max (a) p d max. (w) maximum time to trip resistance agency approvals current (a) time (sec.) r min ( ) r typ ( ) r 1max ( ) 600r150 0.15 0.30 600/60 3 1.00 5.0 8.0 6 12 22 xx 600r150-ra 0.15 0.30 600/60 3 1.00 5.0 7. 5 7 10 20 xx 600r150-rb 0.15 0.30 600/60 3 1.00 4.5 - 9 12 22 xx 600r160 0.16 0.32 600/60 3 1.00 7. 5 18 4 10 18 xx 600r160-ra 0.16 0.32 600/60 3 1.00 9.5 - 4 7 16 xx 600r160-r1 0.16 0.32 600/60 3 1.00 9.0 - 4 8 17 xx description features applications t 3 p ) 4 d p n q m j b o u b o e leadCfree t ' b t u u j n f o u p u s j q t # j o o f e b o e t p s u f e o b s s p x resistance ranges available t o " i p m e d v s s f o u range, 60vdc operating voltage t 7 " $ j o u f s s v q u s b u j o h secondary overcurrent protection for: t $ f o u s b m 0 g m d f equipment (co) t $ v t u p n f s 1 s f n j t f t equipment (ce) t " m b s n t z t u f n t t 4 f u 5 p q # p y f t 4 5 #
t 7 p j d f p w f s * 1 7 0 * 1
t 4 v c t d s j c f s - j o f * o u f s g b d f circuit (slic) 600r series agency approvals agency agency file number e183209 r50120008 i hold = hold current: maximum current device will pass without tripping in 23c still air. i trip = trip current: minimum current at which the device will trip in 23c still air. v int = maximum voltage the device can withstand without damage at rated current (i max) v op = the device regular operation voltage i max = maximum fault current device can withstand without damage at rated voltage (v max ) p d = power dissipated from device when in the tripped state at 23c still air. r min = minimum resistance of device in initial (un-soldered) state. r typ = typical resistance of device in initial (un-soldered) state. r 1max = maximum resistance of device at 20c measured one hour after tripping. caution: operation beyond the speci?ed rating may result in damage and possible arcing and ?ame.
revised: october 24, 2008 ?2008 littelfuse, inc. polyfuse ? resettable ptcs ?2008 littelfuse, inc. 600r series radial leaded > 600r series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/600r.html for current information. temperature rerating curve -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 10% 30% 50% 70% 90% 110% 130% 150% 170% temperature (c) percentage of rated current average time current curves part number lightning power cross 600r150 600r160 tia-968-a C 1.5kv 10/160s 800v 10/560s telcordia gr 1089 C 1.0kv 10/1000s 2.5kv 2/10s ul60950, 3rd ed C 600vac, 40a telcordia gr C 1089 C 600vac, 60a devices should be independently evaluated and tested for use in any speci?c application agency speci?cation selection guide for telecom and networking applications the average time current curves and temperature rerating curve performance is affected by a number or variables, and these curves provided as guidance only. customer must verify the performance in their application. ambient operation temperature -40c -20c 0c 23c 40c 60c 85c part number hold current (a) 600r150 0.26 0.23 0.19 0.15 0.124 0.062 0.03 600r160 0.27 0.24 0.20 0.16 0.13 0.07 0.05 temperature rerating 0.1 1 10 100 current in amperes 10 1 0.1 10000 1000 100 0.15 a 0.16 a 100000 600r time in seconds
?2008 littelfuse, inc. revised: october 24, 2008 polyfuse ? resettable ptcs ?2008 littelfuse, inc. 600r series radial leaded > 600r series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/600r.html for current information. 600r series soldering parameters - wave soldering condition wave soldering peak temp/ duration time 260c < 5 sec > 220c 2 sec ~ 20 sec preheat 140c~ 180c 180 sec ~ 210 sec storage condition 0c~35c, < 70%rh t 3 f d p n n f o e f e t p m e f s j o h n f u i p e t i f b u f m f n f o u p w f o p s n 2 environment for leadCfree t % f w j d f t b s f e f t j h o f e u p c f x b w f t p m e f s f e u p u i f c p u u p n side of the board. t % f w j d f t d b o c f d m f b o f e v t j o h t u b o e b s e j o e v t u s z n f u i p e t and solvents. t 5 i j t q s p m m f d b o c f v t f e g p s m f b e g s f f e f w j d f note: if soldering temperatures exceed the recommended pro?le, devices may not meet the performance requirements. preheating 160 190 220 260 0 2 to 5 temperature (c) soldering cooling 20-30 180 to 210 time(s) protection application guide region/speci?cation application device selection north america telcordia gr-1089 *access network equipment remote terminal repeaters wan equipment cross -connect 600r150 600r160 north america tia-968-a, ul60950 customer and it equipment analog modems adsl, xdsl modems phone sets, pbx systems internet appliances pos terminals 600r150 600r160 north america telcordia gr-1089 central of?ce pots/isdn linecards t1/e1/j1 linecards adsl/vdsl splitters csu/dsu 600r150 600r160 north america telcordia gr-1089 *intrabuilding communication systems lan, voip cards local loop handsets 600r150 600r160 south america/asia/europe itu k .20 and k .21 *resistance binned parts are recommended
revised: october 24, 2008 ?2008 littelfuse, inc. polyfuse ? resettable ptcs ?2008 littelfuse, inc. 600r series radial leaded > 600r series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/600r.html for current information. environmental speci?cations operating/storage temperature -40c to +85c maximum device surface temperature in tripped state 125c passive aging 85c/85c, 1000 hours humidity aging +85c, 85% r.h.,1000 hours thermal shock milCstdC202f, method 107g +125c to -55c 10 times solvent resistance milCstdC202, method 215f physical speci?cations lead material tin-plated copper soldering characteristics solderability per milCstdC202, method 208e insulating material cured, ?ame retardant epoxy polymer meets ul94v-0 requirements. device labeling marked with lf, voltage, current rating, and date code. soldering parameters - solder re?ow condition re?ow peak temp/ duration time 260c > 5 sec > 220c 30 sec ~ 60 sec preheat 160c~ 190c 60 sec ~ 90 sec storage condition 0c~35c, < 70%rh t 3 f d p n n f o e f e s f n p x n f u i p e t * 3
w b q p s q i b t f p w f o
i p u air oven, n 2 environment for lead-free. t % f w j d f t b s f o p u e f t j h o f e u p c f x b w f t p m e f s f e u p u i f bottom side of the board. t % f w j d f t d b o c f d m f b o f e v t j o h t u b o e b s e j o e v t u s z n f u i p e t and solvents. note: if re?ow temperatures exceed the recommended pro?le, devices may not meet the performance requirements. preheating 160 190 220 260 0 30 to 60 temperature (c) soldering cooling 120 60 to 90 time(s)
?2008 littelfuse, inc. revised: october 24, 2008 polyfuse ? resettable ptcs ?2008 littelfuse, inc. 600r series radial leaded > 600r series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/600r.html for current information. 600r series dimensions b a e d c f part number a b c d e physical characteristics inches mm inches mm inches mm inches mm inches mm lead (dia) material max. max. max. max. max. max. min. min. typ. typ. inches mm 600r150 0.53 13.5 0.50 12.6 0.24 6 0.19 4.7 0.20 5.1 0.026 0.65 sn/cu 600r150-ra 0.53 13.5 0.50 12.6 0.24 6 0.19 4.7 0.20 5.1 0.026 0.65 sn/cu 600r150-rb 0.53 13.5 0.50 12.6 0.24 6 0.19 4.7 0.20 5.1 0.026 0.65 sn/cu 600r160 0.63 16 0.50 12.6 0.24 6 0.19 4.7 0.20 5.1 0.026 0.65 sn/cu 600r160-ra 0.63 16 0.50 12.6 0.24 6 0.19 4.7 0.20 5.1 0.026 0.65 sn/cu 600r160-r1 0.63 16 0.50 12.6 0.24 6 0.19 4.7 0.20 5.1 0.026 0.65 sn/cu packaging part marking system part ordering number system r: radial i hold current code (see table below) 600 r 160 - ra f quantity code: f=200 u= 5 00 z = 600 series peak voltage rating rx: resistance range (x = a-z or 1-9) [not applicable for all packaging style blank: bulk r: t ape & ammo part number ordering number i hold (a) i hold code packaging option quantity quantity & packaging codes 600r150 600r150f 0.15 150 bulk 200 f 600r150zr tape and ammo 600 zr 600r150-ra 600r150-raf 0.15 150 bulk 200 f 600r150-razr tape and ammo 600 zr 600r150-rb 600r150-rbf 0.15 150 bulk 200 f 600r150-rbzr tape and ammo 600 zr 600r160 600r160f 0.16 160 bulk 200 f 600r160ur tape and ammo 500 ur 600r160-ra 600R160-RAF 0.16 160 bulk 200 f 600r160-raur tape and ammo 500 ur 600r160-r1 600r160-r1f 0.16 160 bulk 200 f 600r160-r1ur tape and ammo 500 ur 600 1 5 0 xxxx voltage rating current rating date code (contact littelfuse for additional information) littelfuse t rademark
revised: october 24, 2008 ?2008 littelfuse, inc. polyfuse ? resettable ptcs ?2008 littelfuse, inc. 600r series radial leaded > 600r series speci?cations are subject to change without notice. please refer to www.littelfuse.com/series/600r.html for current information. dimension eia mark iec mark dimensions dim. (mm) tol. (mm) carrier tape width ww 18 -0.5 / +1.0 hold down tape width: w 4 w 0 11 min. top distance between tape edges w 6 w 2 3 max. sprocket hole position w 5 w 1 9 -0.5 / +0.75 sprocket hole diameter* d 0 d 0 4 -0.32 / +0.2 abscissa to plane(straight lead) hh 18.5 -/+ 3.0 abscissa to plane(kinked lead) h 0 h 0 16 -/+ 0.5 abscissa to top h 1 h 1 32.2 max. overall width w/o lead protrusion c 1 42.5 max. overall width w/ lead protrusion c 2 43.2 max. lead protrusion l 1 l 1 1.0 max. protrusion of cut out ll 11 max. protrusion beyond hold-down tape l 2 l 2 not speci?ed sprocket hole pitch: 600r150 & 600r160 p 0 p 0 25.4 -/+ 0.5 device pitch: 600r150 & 600r160 25.4 pitch tolerance 20 consecutive. -/+ 1 tape thickness tt 0.9 max. tape thickness with splice t 1 2.0 max. splice sprocket hole alignment 0 -/+ 0.3 body lateral deviation h h 0 -/+ 1.0 body tape plane deviation p p 0 -/+ 1.3 ordinate to adjacent component lead* p 1 p 1 3.81 -/+ 0.7 lead spacing ff 5.08 -/+ 0.8 tape and ammo speci?cations devices taped using eia468-b/ie286-2 standards. see table below and figure 1 for details. *differs from eia speci?cation tape and ammo diagram a b a 1 l 1 p 0 d 0 f l w 4 h 0 i 2 h 1 w 5 w reference plane h h h 1 h c 1 c 2 h p direction of unreeling cross section a - b t figure 1
|
